Contents Menu Expand Light mode Dark mode Auto light/dark, in light mode Auto light/dark, in dark mode Skip to content
MORe 5.9.0 documentation
Light Logo Dark Logo
MORe 5.9.0 documentation
  • Installation
  • License setup
  • User Help
    • ANSYS
      • Installation of Export for MORe ANSYS ACT app
      • ANSYS model preparation
      • Export from ANSYS and import to MORe
      • Model preparation for tabular modal damping
    • Composition
      • Components
        • Component
          • Structure
          • Models
            • Mechanical
              • Systems
                • Original system
                • Rigid system
                • Reduced system
                  • No damping
                  • Constant modal damping
                  • Segmendted modal damping
                  • Tabular modal damping
                  • Rayleigh damping
                • Reduced-coupled system
              • Interfaces
            • Thermal
              • Systems
                • Original system
                • Reduced system
              • Interfaces
      • Links
        • Link
      • Link properties
        • General stiffness
        • General viscous damping
        • Elastic Joint
        • Linear Guide
        • Bearing
        • Ball screw drive
        • Gear drive
        • Belt drive
        • Rack and pinion
        • Worm Gear
        • Kinetic friction
        • Heat transfer coefficient
        • Thermal contact conductivity
      • Controller
        • Controller
          • Architecture
            • Cascade
          • Filter
          • Motor
            • Direct Drive
            • Equivalent motor mass
            • Gearmotor
      • Kinematics
        • Axis
      • Analyses
        • Modal analysis
        • Frequency response analysis
        • Tabular static analysis
        • Stiffness analysis
        • Transient analysis
        • Thermal steady state analysis
        • Thermal transient analysis
        • Thermal frequency response analysis
    • Simulation
      • Load cases
        • Mechanical loadcases
        • Thermal loadcases
      • Data tables
      • Studies
        • Tabular studies
        • Custom studies
    • Postprocessor
      • Results
        • Common features
          • Custom evaluations
        • Modal analysis
          • Modal evaluation
            • Modal animator
          • Profile evaluation
            • Figure viewer
            • Tabular viewer
        • Frequency response analysis
          • FRF evaluation
            • FRF animator
            • Figure viewer
            • Tabular viewer
          • Profile evaluation
            • Figure viewer
            • Tabular viewer
        • Stiffness analysis
          • Stiffness evaluation
            • Stiffness viewer
        • Tabular static analysis
          • Static evaluation
            • Static shape animator
            • Static index animator
            • Figure viewer
            • Tabular viewer
          • Profile evaluation
            • Figure viewer
            • Tabular viewer
        • Transient analysis
          • Transient mechanical evaluation
            • Transient mechanical animator
            • Figure viewer
            • Tabular viewer
          • Profile evaluation
            • Figure viewer
            • Tabular viewer
        • Thermal steady state analysis
          • Thermal steady state evaluation
            • Thermal steady state animator
            • Figure viewer
            • Tabular viewer
          • Profile evaluation
            • Figure viewer
            • Tabular viewer
        • Thermal transient analysis
          • Transient thermal evaluation
            • Transient thermal animator
            • Figure viewer
            • Tabular viewer
          • Profile evaluation
            • Figure viewer
            • Tabular viewer
        • Thermal frequency response analysis
          • Thermal FRF evaluation
            • FRF animator
            • Figure viewer
            • Tabular viewer
          • Profile evaluation
            • Figure viewer
            • Tabular viewer
        • Thermo-mechanical frequency response analysis
          • Thermo-mechanical FRF evaluation
            • FRF animator
            • Figure viewer
            • Tabular viewer
          • Profile evaluation
            • Figure viewer
            • Tabular viewer
  • API Reference
    • API
      • ApiGateway
      • simulation
        • data_tables
          • data_table_setup
            • DataTableSetup
          • partial_find_creator_setup
            • PartialFindCreatorSetup
        • load_cases
          • load_case_container_setup
            • LoadCaseContainerSetup
          • load_case_setup
            • LoadCaseSetupPipeline
          • load_setup
            • DofSettable
            • LoadSetup
            • RotationSettableMixin
            • SourceTargetSettableMixin
            • TranslationSettableMixin
        • simulation_setup
          • SimulationSetup
        • studies
          • job_setup
            • JobCreationContext
          • studies_setup
            • StudiesSetup
      • Load Cases API
        • mechanical_load_case_api
          • MechanicalLoadCaseSetup
        • thermal_load_case_api
          • ThermalLoadCaseSetup
      • Mechanical Loads API
        • component_acceleration_api
          • ComponentAccelerationSetup
        • composition_acceleration_api
          • CompositionAccelerationSetup
        • controller_command_api
          • ControllerCommandSetup
        • link_load_api
          • LinkLoadSetup
        • link_spacer_api
          • LinkSpacerSetup
        • rail_profile_api
          • RailProfileSetup
      • Thermal Loads API
        • heat_flow_api
          • HeatFlowSetup
        • heat_flux_api
          • HeatFluxSetup
        • interface_heat_flux_api
          • InterfaceHeatFluxSetup
        • interface_heat_flow_api
          • InterfaceHeatFlowSetup
        • convection_api
          • ConvectionSetup
      • Data Tables API
        • scripting_api
          • transient_data_table_setup
            • TransientDataTableSetup
            • VarAndData
          • transient_partial_find_creator_setup
            • TransientPartialFindCreatorSetup
      • postprocessor
        • evaluations
          • evaluation_setup
            • EvaluationSetup
        • postprocessor_setup
          • PostprocessorSetup
        • simresult_setup
          • SimresultSetup
  • IDE Integration
  • About
Back to top
View this page

Link¶

Link definition¶

Mechanical or thermal interaction between two interfaces or between one interface and the inertial system are defined using links. It is defined by a target and a source interface. The interaction between displacement and velocities is characterized by the damping and stiffness matrices, which can be defined in the link properties catalog.

Use ground for source¶

Select only for ground to base connection.

Target model/interface¶

Select a model and an interface of this model as target for the link.

Source model/interface¶

Select a model and an interface of this model as source for the link.

Synchronisation of coordinate systems¶

For both location and orientation of a link, a master can be defined. If a master interface is defined, the slave interface location or orientation is then changed to the one of the master. This allows to ensure an exact matching of the location for both interfaces of a link.

Location master¶

Select between target or source as location master. Select move slave interface if the interface of the slave should move with the master interface.

Orientation master¶

Select between target or source as orientation master.

Physical properties¶

Select a mechanical or thermal link property for the link. They have to be defined in an earlier step (see chapter link properties catalog in the user help).

Context Menu¶

Duplicate/Delete¶

Duplicate/Delete the selected link.

Next
Link properties
Previous
Links
Copyright © 2024, inspire AG
Made with Sphinx and @pradyunsg's Furo
On this page
  • Link
    • Link definition
      • Use ground for source
      • Target model/interface
      • Source model/interface
      • Synchronisation of coordinate systems
        • Location master
        • Orientation master
      • Physical properties
    • Context Menu
      • Duplicate/Delete